Extensions

DC Power Control

Only on JetKVM for now. Support for JetKVM Mini comes in a later release.
DC Power Control extension board

The DC Power Control extension sits between a DC-powered device and its power supply, using a standard 5.5×2.5 mm connector. It takes 12 to 20 volts and also powers the JetKVM over its cable, so one supply runs both.

Works with

ConnectionWorks with
RJ-12 cableJetKVM
5-pin to RJ-12 cableJetKVM (microSD) and JetKVM PoE

In the box

  • Extension board
  • Extension cable to the JetKVM
  • 5.5/2.5 mm male to 5.5/2.5 mm male cable

Firmware

The board rarely needs a firmware update, and it doesn't update over the air with JetKVM. Update only when a release fixes something you're seeing.

Flash a firmware updateDownload the file and flash it from a computer over USB.