Using JetKVM
Video
All video settings are in JetKVM's web interface, under Settings, then Video. The defaults work for most setups.
Hide JetKVM display when idle
The computer sees JetKVM as a monitor, even when no one is using it. If you also use the computer with its own screen, that gets in the way:
- The desktop extends onto a screen you can't see, and windows or the mouse end up there.
- Some laptops keep their built-in screen off while JetKVM is plugged in.
Turn on Hide JetKVM display when idle. When no one is connected, JetKVM unplugs itself from the computer, as if you'd pulled the HDMI cable. When you connect, it plugs back in and the computer picks it up again, which can take a few seconds.
Stream
Quality
| Quality | Use it |
|---|---|
| Auto | The default. Adapts to your connection, up to High. |
| High | For the sharpest picture on a fast connection. |
| Medium | To balance picture and bandwidth. |
| Low | On a slow or metered connection, like a phone hotspot. |
Codec
| Codec | Use it |
|---|---|
| Auto | The default. Picks the best codec your browser supports. |
| H.265 | A better picture than H.264 at the same bandwidth. JetKVM only. |
| H.264 | When video stutters or doesn't play in your browser. JetKVM Mini always uses it. |
EDID
EDID is how JetKVM tells the computer which resolutions it supports. The computer uses it to choose its video output. JetKVM Default works for most computers; only change it when the picture doesn't.
When to change it
- The screen stays black in the BIOS or UEFI, but works once the OS starts.
- The computer picks the wrong resolution or refresh rate.
Pick a preset under EDID. Each one makes JetKVM look like a common monitor. Restart the computer if the picture doesn't change right away.
Presets
| Preset | JetKVM | JetKVM Mini |
|---|---|---|
| JetKVM Default | Yes | Yes |
| Dell D2721H, 1920×1080 | Yes | Yes |
| Acer B246WL, 1920×1200 | Yes | No |
| ASUS PA248QV, 1920×1200 | Yes | No |
| Dell iDRAC, 1280×1024 | Yes | No |
Custom EDID
On JetKVM, choose Custom, paste an EDID as hexadecimal and click Set Custom EDID. Restore to default goes back to JetKVM Default. JetKVM Mini only offers its presets.