> Documentation index: https://jetkvm.com/llms.txt

# DC Power Control

> Switch the power of DC-powered devices like mini PCs and NAS units, and power the JetKVM from the same supply.

**Only on JetKVM for now.** Support for JetKVM Mini comes in a later release.

DC Power Control extension board

The DC Power Control extension sits between a DC-powered device and its power supply, using a standard 5.5×2.5 mm connector. It takes **12 to 20 volts** and **also powers the JetKVM** over its cable, so one supply runs both.

## Works with

| Connection           | Works with                                                                |
| -------------------- | ------------------------------------------------------------------------- |
| RJ-12 cable          | [JetKVM](https://jetkvm.com/docs/devices/jetkvm)                          |
| 5-pin to RJ-12 cable | [JetKVM (microSD) and JetKVM PoE](https://jetkvm.com/docs/devices/jetkvm) |

## In the box

* Extension board
* Extension cable to the JetKVM
* 5.5/2.5 mm male to 5.5/2.5 mm male cable

## Firmware

The board rarely needs a firmware update, and it doesn't update over the air with JetKVM. Update only when a release fixes something you're seeing.

* [Flash a firmware update: Download the file and flash it from a computer over USB.](https://jetkvm.com/docs/advanced-usage/ota-updates-dc)