> Documentation index: https://jetkvm.com/llms.txt

# ATX Power Control

> Power on, reset and monitor a PC remotely, without losing its front panel buttons and LEDs.

**Only on JetKVM for now.** Support for JetKVM Mini comes in a later release.

ATX Power Control extension board

* [Install the board: Mount it in your PC, wire the front panel header and connect the JetKVM.](https://jetkvm.com/docs/extensions/atx-power-control-installation)
* [Troubleshoot: The PC doesn't power on, reset or shut down from JetKVM.](https://jetkvm.com/docs/extensions/atx-power-control-troubleshooting)

A board that mounts in a free PCIe slot opening and sits between the motherboard's `F_PANEL` header and the case's front panel cables, so the case buttons and LEDs keep working. Its USB-C port or pin header can also power the JetKVM.

In the web interface, **Power** gives a short press, like tapping the case button. Hold it for 3 seconds to hold the button down instead, which forces the PC off.

## Works with

| Connection           | Works with                                                                |
| -------------------- | ------------------------------------------------------------------------- |
| RJ-12 cable          | [JetKVM](https://jetkvm.com/docs/devices/jetkvm)                          |
| 5-pin to RJ-12 cable | [JetKVM (microSD) and JetKVM PoE](https://jetkvm.com/docs/devices/jetkvm) |

## In the box

* **ATX extension board** with USB-C and extension ports
* **Extension cable** to the JetKVM
* **PCIe slot cover brackets**, standard and small
* **10-pin ribbon cable** to the motherboard's `F_PANEL` header
* **USB-C to USB-A cable**
* **Jumper caps**, 4

## Firmware

The board rarely needs a firmware update, and it doesn't update over the air with JetKVM. Update only when a release fixes something you're seeing.

* [Flash a firmware update: Download the file and flash it from a computer over USB.](https://jetkvm.com/docs/advanced-usage/ota-updates-atx)