> Documentation index: https://jetkvm.com/llms.txt

# DC Extension

> Flash new firmware to the DC Power Control extension over USB.

**Only on JetKVM for now.** Support for JetKVM Mini comes in a later release.

The DC Extension rarely needs a firmware update. It can't update over the air, so you flash it from a computer over USB.

Update when the release notes fix something you're seeing. If everything works, you can skip it. To hear about new releases, open the [dc-extension-firmware](https://github.com/jetkvm/dc-extension-firmware) repository and choose **Watch**, then **Custom**, then **Releases**.

## Download the firmware

Download the `.uf2` file from the latest release:

* [DC Extension firmware 0.2.0: Released 19 September 2025, with release notes](https://github.com/jetkvm/dc-extension-firmware/releases/tag/0.2.0)

## Enter flash mode

1. Disconnect all cables from the DC Extension.
2. Press and hold the flash button, between the **DC 9V-20V** port and the USB-C port. While holding it, connect the board's USB-C port to your computer.
3. The board appears on your computer as a removable drive.

## Flash the firmware

1. Drag the `.uf2` file onto the drive.
2. Wait for the drive to disappear. The board restarts with the new firmware.