> Documentation index: https://jetkvm.com/llms.txt

# ATX Extension

> Flash new firmware to the ATX Power Control extension over USB.

**Only on JetKVM for now.** Support for JetKVM Mini comes in a later release.

The ATX Extension rarely needs a firmware update. It can't update over the air, so you flash it from a computer over USB.

Update when the release notes fix something you're seeing. If everything works, you can skip it. To hear about new releases, open the [atx-extension-firmware](https://github.com/jetkvm/atx-extension-firmware) repository and choose **Watch**, then **Custom**, then **Releases**.

## Download the firmware

Download the `.uf2` file from the latest release:

* [ATX Extension firmware 0.1.0: Released 3 May 2026, with release notes](https://github.com/jetkvm/atx-extension-firmware/releases/tag/0.1.0)

## Enter flash mode

1. Disconnect all cables from the ATX Extension.
2. Insert a pin into the small flash-mode hole on the board and hold the button inside. While holding it, connect the board to your computer over USB.
3. The board appears on your computer as a removable drive.

## Flash the firmware

1. Drag the `.uf2` file onto the drive.
2. Wait for the drive to disappear. The board restarts with the new firmware.